Milwaukee M18 FUEL 1-1/8″ SDS Plus Rotary Hammer w/ ONE-KEY & HAMMERVAC Dedicated Dust Extractor Kit & M18 FUEL 1/2″ Compact Impact Wrench w/ Friction Ring Bare Tool Kit 2915-22DE & 2855-20

The MILWAUKEE M18 FUEL 1-1/8″ SDS Plus Rotary Hammer w/ ONE-KEY & HAMMERVAC Dedicated Dust Extractor Kit is the next generation of cordless rotary hammers delivering ultimate jobsite performance and productivity. The M18 FUEL 1-1/8″ SDS Plus Rotary Hammer is the fastest drilling and hardest-hitting rotary hammer in its class with AUTOSTOP Control for enhanced safety, drilling up to 50 5/8″ x 3″ holes per charge when paired with the M18 HIGH OUTPUT XC6.0 Battery. This cordless hammer drill provides maximum control and enhanced safety with the AUTOSTOP Kickback Control. This feature prevents over-rotation if the tool gets bound up while drilling in rebar or hard aggregate. The Milwaukee M18 FUEL HAMMERVAC 1-1/8″ Dedicated Dust Extractor features an inline design engineered to connect directly to and be power by the M18 FUEL 1-1/8″ SDS Plus Rotary Hammer. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS, which filters 99.97% of all particles greater than 0.3um, means more compatibility on the jobsite. The built-in adjustable depth stop and ruler offer easy and precise adjustments. This dust extractor has OSHA Table One Compliance for respirable crystalline silica when drilling up to 1-1/8″ in diameter and 8″ in depth. This extractor features AUTOPULSE Filter Cleaning Mechanism that automatically cleans the filter after each use. The dust box comes equipped with a vacuum port for suctioning out the dust with a large vacuum or dust extractor instead of dumping the dust out into a trash receptacle.

The MILWAUKEE M18 FUEL 1/2″ Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.9″ in length with a POWERSTATE Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 1/2″ impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge.